In-Field Coax Connector Test Using the Path Align-R
Technical & Application Notes
A Path Align-R test set can be used in lieu of expensive cable sweeping equipment. Simply attach the Path Align-R to each end of the connectorized
coax and measure the “Cable Loss” at the specific frequency the cable will see during operation. Also, if more than one coax is going
to be attached to the tower, you can compare the “Cable Loss” of each coax before they are installed.
coax and measure the “Cable Loss” at the specific frequency the cable will see during operation. Also, if more than one coax is going
to be attached to the tower, you can compare the “Cable Loss” of each coax before they are installed.
